High Gloss Floor Finish FAQs

This product can be used on all resilient flooring such as linoleum, rubber or vinyl tile. Product can also be used on sealed wood or cork floors. Recommended for use on terrazzo and concrete that has been previously sealed. This product is not recommended for use on marble or unsealed wood floors.

High Gloss Floor Finish is not recommended for use on these surfaces unless the surface has been sealed. Unsealed surfaces such as these will absorb the finish, leaving no shine to the surface. When used as directed, High Gloss Floor Finish can be used on these surfaces only if they have been previously sealed.

While not required to achieve a professional-looking finish with the product, applying additional coats will add increased depth, luster and durability to the product's performance.

No, this product is for indoor use only.

No, do not dilute. Product is ready-to-use.

Use a rayon, nylon or synthetic blended string mop. Do not use a cotton or sponge mop as these will leave lint or particles in the finish that will be noticable when dried.

This will occur in nearly all applied finishes. Please call 1-866-999-7484 for further advice on how to repair the finish.

For resiliant flooring such as vinyl tile or rolled vinyl flooring, a sealer is not necessary. For terrazzo, concrete and commercial wood surfaces, it is highly recommended. For ceramic tile, slate, stone floors it is optional.

Product that has been exposed to freezing temperatures and separated cannot be used.

As with all chemicals, regulations prohibit disposal of this product or rinse water in storm drains, lakes or streams. Please help protect the environment by observing all applicable regulations for storage and disposal. Please rinse and recycle the container.

One 2.5 gallon container will typically cover 5,000 to 7,000 square feet per coat when applied according to label directions.

The pH is 8.4.