Floor Stripper FAQs

This product can be used on all resilient flooring such as rubber or vinyl. It is also recommended for use to remove applied finished from ceramic tile as well as terrazzo or concrete that has been previously sealed. This product is not recommended for use on marble or unsealed wood floors.

Floor Stripper is not recommended for use on these surfaces unless the surface has been sealed. When used as directed, Floor Stripper will not harm sealed surfaces.

No

A cotton string mop. These mop heads are available at Sam's Club^® in the same aisle as ProForce^® products.

For best results, remove excess debris and dust mop the floor prior to applying Floor Stripper.

See label for details. For light to moderate buildup mix 1 part product to 6 parts hot water. For heavy finish buildup mix 1 part product to 1 part hot water.

The 3-5 minute time frame is a guideline to help you achieve the best results possible with this product. Longer contact times will not harm your floors. However, do not allow product to dry on the floor.

This product should only be used in a well-ventilated area.

As with all chemicals, regulations prohibit disposal of this product or rinse water in storm drains, lakes or streams. Please help protect the environment by observing all applicable regulations for storage and disposal. Please rinse and recycle the container.

No, never mix this product with other cleaners or chemicals.

This product, when used as directed, will not harm septic systems.

The pH is 12.5 when in concentrated form before it is diluted with water for use.